Molds & Tooling
8 görüntüleme
PA12 Product Sticking to Mold
Sorun Belirtisi
The product sticks to the mold.
Neden Analizi
Low mold temperature causes tight grip or surface interaction; improper demolding design.; During on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience; This mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Çözüm
①Optimize mold temperature; ②increase draft angle; ③polish cavity; ④balanced ejection.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; Change only one variable at a time and record parameter changes to facilitate locating effective measures
Temel Çıkarım
Solve mold sticking from temperature and structure.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; Include this case in the defect archive as a troubleshooting reference for subsequent similar problems
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!