Molds & Tooling
10 visualizações
PA6 Trapped Air Burning
Fenómeno do problema
Black spots and scorch marks at the end of the cavity, with fixed positions.
Análise das causas
Poor venting diesel effect; high-speed filling at the end compresses air and heats up; PA6 processing temperature is high, and the risk of trapped air burning is large; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience.
Solução
①Open vent grooves at corresponding positions;②reduce injection speed at the filling end to leave time for venting;③clean vent grooves clogged by oil;④moderate clamping force to avoid pressing closed the parting line vent gaps;⑤reduce the amount of release agent to prevent contamination of venting.
Conclusão principal
PA6 burning = 'poor venting': high-temperature nylon fears trapped air even more; opening and cleaning vent grooves is the focus of daily maintenance; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!