Injection Molding
2 visualizações
PC Jetting Marks
Fenómeno do problema
When the gate faces an open cavity, snake-shaped curved marks appear on the product surface, appearing as twisted stripes on transparent parts.
Análise das causas
After the high-viscosity melt is ejected from the gate at high speed without hitting the wall, the melt strand folds and accumulates in the air; excessive initial injection speed and a small gate are the main causes.
Solução
①Change the gate angle so that the melt stream first hits the cavity wall; ②Reduce the initial injection speed and then speed up; ③Enlarge the gate; ④Increase the mold temperature.
Conclusão principal
Let the melt stream 'stick to the wall first and then spread out', and the jetting marks disappear.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!