Molds & Tooling
6 visualizações
PCABS Jetting Marks
Fenómeno do problema
[Problem Phenomenon] PC/ABS snake-shaped jetting marks near the gate
Análise das causas
The melt jets at high speed through a too small gate directly into the empty cavity; the front folds into marks; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
Lap fan gates against the wall; gate facing the core; reduce initial speed; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Conclusão principal
PC/ABS jetting marks rely on gate wall-hitting arrangement; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!