Molds & Tooling
5 مشاهدة
PCABS Jetting Marks
ظاهرة المشكلة
[Problem Phenomenon] PC/ABS snake-shaped jetting marks near the gate
تحليل الأسباب
The melt jets at high speed through a too small gate directly into the empty cavity; the front folds into marks; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
Lap fan gates against the wall; gate facing the core; reduce initial speed; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
الخلاصة الأساسية
PC/ABS jetting marks rely on gate wall-hitting arrangement; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!