Extrusion & Post
7 visualizações
PC Printing and Painting
Fenómeno do problema
[Problem Phenomenon] PC products require printing and painting decoration
Análise das causas
PC surfaces can be printed and painted with relatively good adhesion; it is ready after cleaning to remove mold release agent; IMD/IML processes are mature; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
Solução
Clean before printing and painting; select matching processes for IMD; adhesion testing; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
Conclusão principal
PC printing and painting have good adhesion; IMD is mature; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!