Material Drying
6 visualizações
PMMA Bubbles Three Routes
Fenómeno do problema
Bubbles in PMMA products appear repeatedly and remain after drying
Análise das causas
Bubbles have three routes of causes: moisture, degraded monomer, and entrapped air; treating only one route cannot cure the root; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Solução
Identify by air shots: for water bubbles check drying, for degradation bubbles check temperature and residence, for entrapped air bubbles check back pressure and venting; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Bubbles are systematically troubleshot by the three routes of causes; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!