Molds & Tooling
7 visualizações
PPS Surface Jetting Marks
Fenómeno do problema
Snake-shaped jetting marks in front of the gate.
Análise das causas
High-speed filling jetting; PPS's low viscosity makes jetting more likely.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
①Multi-stage injection with low initial speed; ②enlarge the gate; ③adjust gate position; ④increase mold temperature.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Jetting marks are controlled by the speed curve; low-viscosity materials need more attention.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!