Molds & Tooling
6 مشاهدة
PPS Surface Jetting Marks
ظاهرة المشكلة
Snake-shaped jetting marks in front of the gate.
تحليل الأسباب
High-speed filling jetting; PPS's low viscosity makes jetting more likely.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
①Multi-stage injection with low initial speed; ②enlarge the gate; ③adjust gate position; ④increase mold temperature.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Jetting marks are controlled by the speed curve; low-viscosity materials need more attention.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!