Molds & Tooling
7 visualizações
PP Glass Fiber Warpage
Fenómeno do problema
【Problem Phenomenon】Glass fiber PP warpage is harder to control than ordinary PP
Análise das causas
Fiber orientation causes shrinkage anisotropy, superimposed with uneven crystallization; gate position determines orientation; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Solução
Optimize gates to homogenize fiber orientation; uniform mold temperature; low-warpage grades; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Conclusão principal
The root of PP glass fiber warpage is orientation and crystallization, the gate is the key; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!