Molds & Tooling
5 görüntüleme
PP Glass Fiber Warpage
Sorun Belirtisi
【Problem Phenomenon】Glass fiber PP warpage is harder to control than ordinary PP
Neden Analizi
Fiber orientation causes shrinkage anisotropy, superimposed with uneven crystallization; gate position determines orientation; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Çözüm
Optimize gates to homogenize fiber orientation; uniform mold temperature; low-warpage grades; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Temel Çıkarım
The root of PP glass fiber warpage is orientation and crystallization, the gate is the key; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!