Molds & Tooling
7 visualizações
PSU Notch Sensitivity and Fracture
Fenómeno do problema
PSU products fracture at right angles or sharp corners due to stress concentration; cracks propagate at notches during assembly and use; strength is far below expectations.
Análise das causas
PSU products are quite sensitive to notches; stress concentration factors at right angles or sharp corners are high; the superposition of internal stress and notches accelerates fracture; under impact loads, notches become crack initiation points.
Solução
①Use arc transitions at right angles or sharp corners; ②Structural review to eliminate all sharp corners; ③Low-stress process to reduce initial stress; ④Notch impact testing to verify the design.
Conclusão principal
PSU notch sensitivity requires an absolute fillet principle in design; arc transition is a zero-cost strength improvement; stress management coordinates with structural design.; After confirming effectiveness, solidify the parameters and practices into the work instructions to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!