Extrusion & Post
14 visualizações
TPE extrusion deformation
Fenómeno do problema
TPE extruded products deform, cooling is uneven, and double-layer extrusion shrinks differently
Análise das causas
Causes of TPE extrusion deformation: uneven cooling, double-layer extrusion with different shrinkage rates; slow curing speed, mismatched haul-off speed; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Solução
①uniform cooling; ②adjust shrinkage rate matching; ③increase curing speed; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
Conclusão principal
TPE extrusion deformation is troubleshooted along the three lines of cooling, shrinkage, and curing; shrinkage matching of double-layer extrusion is a special consideration; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!