Extrusion & Post
13 visualizações
Severe EEA extruder screw wear
Fenómeno do problema
After 200h of EEA extrusion, screw and barrel wear reaches 0.5mm
Análise das causas
Filler causes large wear on the screw; insufficient screw material hardness, not nitrided; processing temperature too high causing EEA to adhere to the screw and aggravate wear
Solução
1) Use nitrided screw or bimetallic screw SK-2 alloy; 2) Reduce processing temperature to reduce adhesive wear; 3) Treat filler with coupling agent to reduce friction; 4) Regularly check wear, replace in time when >0.3mm
Conclusão principal
Screw wear is caused by filler friction and adhesion; wear-resistant screw and temperature control are the key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!