Molds & Tooling
7 visualizações
Insufficient EVOH Flatness
Fenómeno do problema
EVOH flat products flatness >0.5mm/100mm warpage
Análise das causas
EVOH shrinkage large and different in each direction; mold cooling uneven; residual stress release causing continuous warpage
Solução
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage differences; 3) Anneal to release residual stress
Conclusão principal
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!