Molds & Tooling
6 مشاهدة
Insufficient EVOH Flatness
ظاهرة المشكلة
EVOH flat products flatness >0.5mm/100mm warpage
تحليل الأسباب
EVOH shrinkage large and different in each direction; mold cooling uneven; residual stress release causing continuous warpage
الحل
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage differences; 3) Anneal to release residual stress
الخلاصة الأساسية
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!