Injection Molding
1 visualizações
Severe PVA internal stress concentration
Fenómeno do problema
PVA product internal stress >15MPa causing cracking during storage
Análise das causas
Injection speed too fast, large orientation stress; uneven cooling freezes thermal stress; improper gate position, concentrated flow orientation
Solução
1) Reduce injection speed to reduce orientation; 2) Uniform mold temperature to reduce thermal stress; 3) Annealing 80°C/4h to release stress; 4) Optimize gate position
Conclusão principal
Internal stress is caused by fast injection and uneven cooling; speed reduction, uniform cooling and annealing are the key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!