Injection Molding
6 visualizações
CEF internal stress concentration severe
Fenómeno do problema
The internal stress of the CEF product is >15MPa, causing cracking during storage
Análise das causas
The injection speed is too fast and the orientation stress is large; uneven cooling freezes thermal stress; the gate position is improper and the flow orientation is concentrated
Solução
1) Reduce the injection speed to reduce orientation; 2) Uniform mold temperature to reduce thermal stress; 3) Anneal at 80°C/4h to release stress; 4) Optimize the gate position
Conclusão principal
Internal stress is caused by fast injection and uneven cooling; reducing speed, uniform cooling and annealing are the key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!