Production & Quality
14 visualizações
Rough Inner Wall of CMC Extruded Pipe
Fenómeno do problema
Inner wall roughness of CMC extruded pipe Ra>10μm affects fluid conveying efficiency
Análise das causas
Mandrel surface is rough or worn; insufficient internal cooling causes the inner wall melt not to be fully sized; CMC melt elasticity causes uneven die swell on the inner wall
Solução
1)Polish mandrel to Ra<0.4μm; 2)Optimize internal cooling system with cooling water through the mandrel; 3)Reduce extrusion rate to reduce the influence of elastic recovery; 4)Add a small amount of low-elasticity resin to improve inner wall smoothness
Conclusão principal
Rough inner wall of pipe is caused by mandrel condition and insufficient cooling; polishing the mandrel and internal cooling are the key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!