Extrusion & Post
13 visualizações
Glass Fibre extruder screw severe wear
Fenómeno do problema
After Glass Fibre extrusion 200h, screw and barrel wear reaches 0.5mm
Análise das causas
Filler causes large screw wear; screw material hardness insufficient, not nitrided; processing temperature too high causes Glass Fibre adhering to screw, aggravating wear
Solução
1) Use nitrided screw or bimetallic screw SK-2 alloy; 2) reduce processing temperature to reduce adhesive wear; 3) treat filler with coupling agent to reduce friction; 4) regularly check wear, replace in time when >0.3mm
Conclusão principal
Screw wear is caused by filler friction and adhesion; wear-resistant screw and temperature control are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!