Blow Molding
10 visualizações
Mold line protrusion of PET stretch-blow bottles
Fenómeno do problema
There are obvious protrusions or flash at the parting line of PET bottles, affecting appearance and labeling.
Análise das causas
Insufficient mold clamping force causes overflow; the parting line is worn or does not fit tightly; '2079851475616104457 pressure is too high.
Solução
Increase clamping force; repair and grind the parting line; appropriately reduce '2079851475616104457 pressure; adjust mold temperature.
Conclusão principal
PET bottle parting line defects are common problems of mold maintenance and process parameters.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!