Blow Molding
9 مشاهدة
Mold line protrusion of PET stretch-blow bottles
ظاهرة المشكلة
There are obvious protrusions or flash at the parting line of PET bottles, affecting appearance and labeling.
تحليل الأسباب
Insufficient mold clamping force causes overflow; the parting line is worn or does not fit tightly; '2079851475616104457 pressure is too high.
الحل
Increase clamping force; repair and grind the parting line; appropriately reduce '2079851475616104457 pressure; adjust mold temperature.
الخلاصة الأساسية
PET bottle parting line defects are common problems of mold maintenance and process parameters.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!