Molds & Tooling
7 visualizações
Insufficient product gloss
Fenómeno do problema
The product surface is dull and lusterless, with unacceptable visual effect
Análise das causas
Mold cavity surface roughness is insufficient; mold temperature is too low and the melt cannot fully replicate the mold surface; material shrinkage itself causes microscopic unevenness
Solução
Improve mold surface polishing grade to above A1 level; appropriately increase mold temperature to increase the replication rate; adjust holding pressure and time to reduce shrinkage
Conclusão principal
Gloss is influenced by both mold surface quality and process conditions
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!