Molds & Tooling
6 مشاهدة
Insufficient product gloss
ظاهرة المشكلة
The product surface is dull and lusterless, with unacceptable visual effect
تحليل الأسباب
Mold cavity surface roughness is insufficient; mold temperature is too low and the melt cannot fully replicate the mold surface; material shrinkage itself causes microscopic unevenness
الحل
Improve mold surface polishing grade to above A1 level; appropriately increase mold temperature to increase the replication rate; adjust holding pressure and time to reduce shrinkage
الخلاصة الأساسية
Gloss is influenced by both mold surface quality and process conditions
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!