Injection Molding
7 visualizações
Incomplete color clearing when switching color masterbatch
Fenómeno do problema
After color change, the previous color still remains after multiple injections
Análise das causas
Previous color material remains in the screw and barrel; accumulated material in dead zones is not completely removed; purging time is insufficient
Solução
Use high-viscosity purging material of the same matrix for color change; the temperature-difference purging method of heating up then cooling down; disassemble the screw and nozzle for thorough cleaning if necessary
Conclusão principal
Thorough color change is necessary for multi-variety small-batch production
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!