Extrusion & Post
13 visualizações
PEEK 3D printing poor interlayer bonding force
Fenómeno do problema
3D printed parts delaminate between layers, with extremely low Z-direction strength
Análise das causas
The previous layer has fully cooled and crystallized, unable to achieve effective diffusion and entanglement with subsequent layers; the printing chamber temperature is insufficient to maintain the interface temperature
Solução
Increase the printing chamber temperature to above 140°C (even close to Tg=143°C) to keep the interlayer in a semi-molten state; reduce the layer thickness (such as 0.1mm) to increase heat penetration; overall annealing after printing
Conclusão principal
Interlayer bonding is the core technical difficulty of PEEK additive manufacturing
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!