Extrusion & Post
14 görüntüleme
EEA extruded film winding wrinkles
Sorun Belirtisi
EEA extruded film shows transverse wrinkles and longitudinal creases after winding
Neden Analizi
Film tension uneven, fluctuating ±20%; film thickness uneven causing inconsistent stretching of each section; after cooling, shrinkage rate differs in all directions
Çözüm
1) Automatic tension control system to stabilize winding tension; 2) Improve film thickness uniformity to ±5%; 3) Adjust guide roller parallelism <0.05mm/m; 4) Wind after the film is fully cooled to <30°C
Temel Çıkarım
Film wrinkling is caused by tension fluctuation and thickness unevenness; automatic tension control and homogenization are the key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!