Extrusion & Post
10 visualizações
EEA extruded film winding wrinkles
Fenómeno do problema
EEA extruded film shows transverse wrinkles and longitudinal creases after winding
Análise das causas
Film tension uneven, fluctuating ±20%; film thickness uneven causing inconsistent stretching of each section; after cooling, shrinkage rate differs in all directions
Solução
1) Automatic tension control system to stabilize winding tension; 2) Improve film thickness uniformity to ±5%; 3) Adjust guide roller parallelism <0.05mm/m; 4) Wind after the film is fully cooled to <30°C
Conclusão principal
Film wrinkling is caused by tension fluctuation and thickness unevenness; automatic tension control and homogenization are the key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!