Extrusion & Post
11 visualizaciones
EEA extruded film winding wrinkles
Fenómeno del problema
EEA extruded film shows transverse wrinkles and longitudinal creases after winding
Análisis de la causa
Film tension uneven, fluctuating ±20%; film thickness uneven causing inconsistent stretching of each section; after cooling, shrinkage rate differs in all directions
Solución
1) Automatic tension control system to stabilize winding tension; 2) Improve film thickness uniformity to ±5%; 3) Adjust guide roller parallelism <0.05mm/m; 4) Wind after the film is fully cooled to <30°C
Conclusión clave
Film wrinkling is caused by tension fluctuation and thickness unevenness; automatic tension control and homogenization are the key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!