Injection Molding
6 görüntüleme
EVA internal stress concentration is severe
Sorun Belirtisi
EVA product internal stress >15MPa causes cracking during storage
Neden Analizi
Injection speed too fast with large orientation stress; uneven cooling freezing thermal stress; improper gate position with concentrated flow orientation
Çözüm
1) Reduce injection speed to decrease orientation; 2) Uniform mold temperature to reduce thermal stress; 3) Annealing at 80°C/4h to release stress; 4) Optimize gate position
Temel Çıkarım
Internal stress is caused by fast injection and uneven cooling; reducing speed, uniform cooling, and annealing are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!