Injection Molding
7 مشاهدة
EVA internal stress concentration is severe
ظاهرة المشكلة
EVA product internal stress >15MPa causes cracking during storage
تحليل الأسباب
Injection speed too fast with large orientation stress; uneven cooling freezing thermal stress; improper gate position with concentrated flow orientation
الحل
1) Reduce injection speed to decrease orientation; 2) Uniform mold temperature to reduce thermal stress; 3) Annealing at 80°C/4h to release stress; 4) Optimize gate position
الخلاصة الأساسية
Internal stress is caused by fast injection and uneven cooling; reducing speed, uniform cooling, and annealing are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!