Injection Molding
6 görüntüleme
Severe Internal Stress Concentration in EVOH
Sorun Belirtisi
EVOH product internal stress >15MPa causing cracking during storage
Neden Analizi
Injection speed too fast, orientation stress large; uneven cooling freezing thermal stress; gate location improper, flow orientation concentrated
Çözüm
1) Reduce injection speed to decrease orientation; 2) Uniform mold temperature to reduce thermal stress; 3) Anneal at 80°C/4h to release stress; 4) Optimize gate location
Temel Çıkarım
Internal stress is caused by fast injection and uneven cooling; speed reduction, uniform cooling and annealing are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!