Extrusion & Post
11 görüntüleme
PVA vacuum vent section material overflow
Sorun Belirtisi
Material overflow at the PVA extrusion vacuum vent section, vent hole clogging
Neden Analizi
PVA melt viscosity low, overflowing at the vacuum vent section; vacuum vent section temperature on the high side, viscosity even lower, aggravating overflow; vent hole design improper
Çözüm
1) Lower vacuum vent section temperature by 5-10°C to increase viscosity; 2) Add a baffle above the vent hole to prevent overflow; 3) Increase screw speed to accelerate conveying and reduce residence
Temel Çıkarım
Overflow is caused by low melt viscosity; temperature reduction and baffle are the key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!