Extrusion & Post
14 visualizaciones
PVA vacuum vent section material overflow
Fenómeno del problema
Material overflow at the PVA extrusion vacuum vent section, vent hole clogging
Análisis de la causa
PVA melt viscosity low, overflowing at the vacuum vent section; vacuum vent section temperature on the high side, viscosity even lower, aggravating overflow; vent hole design improper
Solución
1) Lower vacuum vent section temperature by 5-10°C to increase viscosity; 2) Add a baffle above the vent hole to prevent overflow; 3) Increase screw speed to accelerate conveying and reduce residence
Conclusión clave
Overflow is caused by low melt viscosity; temperature reduction and baffle are the key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!