Extrusion & Post
11 görüntüleme
Gel Particles in CMC Extruded Film
Sorun Belirtisi
Transparent gel particles of 0.1-0.5mm appear on the surface of CMC extruded film
Neden Analizi
High-molecular-weight components in CMC are not fully melted during extrusion, forming local high-crystallinity zones; extrusion temperature is low or mixing is insufficient
Çözüm
1)Increase extrusion temperature by 5-10°C to ensure full melting; 2)Increase screw mixing section length; 3)Inspect raw materials to ensure consistent grade; 4)Replace with finer 120-mesh screen to intercept unmelted particles
Temel Çıkarım
Gel particles are caused by insufficient melting; increasing temperature and mixing are the key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!