Extrusion & Post
9 Aufrufe
Gel Particles in CMC Extruded Film
Problembeschreibung
Transparent gel particles of 0.1-0.5mm appear on the surface of CMC extruded film
Ursachenanalyse
High-molecular-weight components in CMC are not fully melted during extrusion, forming local high-crystallinity zones; extrusion temperature is low or mixing is insufficient
Lösung
1)Increase extrusion temperature by 5-10°C to ensure full melting; 2)Increase screw mixing section length; 3)Inspect raw materials to ensure consistent grade; 4)Replace with finer 120-mesh screen to intercept unmelted particles
Wichtigste Erkenntnis
Gel particles are caused by insufficient melting; increasing temperature and mixing are the key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!