Injection Molding
5 görüntüleme
PETG '2079851475616104452 gate area sink mark
Sorun Belirtisi
Sink marks (shrinkage) appear near the gate of PETG products, affecting appearance and dimensions.
Neden Analizi
Insufficient holding pressure and inadequate feeding at the gate, the gate solidifies too early cutting off the feeding channel, and this area is locally overheated with large cooling shrinkage.
Çözüm
Increase holding pressure and extend holding time; enlarge the gate to delay solidification; ensure the holding switchover point is accurate.
Temel Çıkarım
PETG gate sink marks are related to holding pressure transmission efficiency.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!