Injection Molding
5 görüntüleme
Insufficient filling of PLA '2079851475616104452 (short shot)
Sorun Belirtisi
The cavity is not completely filled during PLA '2079851475616104452.
Neden Analizi
The PLA melt viscosity is relatively large and the fluidity is not as good as PP, etc.; the injection pressure and speed are insufficient; the melt temperature is low; the gate is too small.
Çözüm
Raise the melt temperature to 180-200°C; increase the injection pressure and speed; enlarge the gate; the mold temperature can be appropriately lowered.
Temel Çıkarım
PLA fluidity is the main cause of short shots.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!