Injection Molding
7 visualizações
Insufficient filling of PLA '2079851475616104452 (short shot)
Fenómeno do problema
The cavity is not completely filled during PLA '2079851475616104452.
Análise das causas
The PLA melt viscosity is relatively large and the fluidity is not as good as PP, etc.; the injection pressure and speed are insufficient; the melt temperature is low; the gate is too small.
Solução
Raise the melt temperature to 180-200°C; increase the injection pressure and speed; enlarge the gate; the mold temperature can be appropriately lowered.
Conclusão principal
PLA fluidity is the main cause of short shots.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!