Molds & Tooling
6 مشاهدة
ASA Uneven Gloss
ظاهرة المشكلة
【Problem Phenomenon】Regional gloss differences on ASA product surface, high-gloss parts unqualified
تحليل الأسباب
Uneven mold temperature and cavity surface state differences cause different replication degrees; ASA surface finish is sensitive to mold temperature, differences immediately show as gloss difference; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based only on experience
الحل
Mold temperature homogenized and at upper limit; cavity polishing consistency check; venting optimization to prevent local air trap; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
الخلاصة الأساسية
ASA gloss difference first check mold temperature uniformity, cavity polishing follows; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!