Molds & Tooling
5 مشاهدة
PC/ABS weld line
ظاهرة المشكلة
Weld lines are obvious and low in strength.
تحليل الأسباب
The front temperature of the two flow fronts is low and fusion is poor; low mold temperature and slow speed both aggravate it.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
الحل
①Raise melt and mold temperature; ②optimize gate position; ③increase confluence speed; ④set venting and overflow wells.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Weld line management relies on temperature and gate; high mold temperature is particularly effective for PC/ABS weld lines.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!