Molds & Tooling
6 مشاهدة
PVDF Product Rough Surface
ظاهرة المشكلة
The surface is not smooth.
تحليل الأسباب
Low mold temperature causes poor replication or insufficient melt temperature; the mold surface condition also has an effect.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
الحل
①Increase mold temperature and melt temperature; ②polish the cavity; ③clean the mold surface; ④stabilize the process.; After adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Surface quality is managed by temperature and mold surface.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; Include this case in the defect archive as a reference for troubleshooting similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!