Molds & Tooling
8 visualizaciones
PVDF Product Rough Surface
Fenómeno del problema
The surface is not smooth.
Análisis de la causa
Low mold temperature causes poor replication or insufficient melt temperature; the mold surface condition also has an effect.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
Solución
①Increase mold temperature and melt temperature; ②polish the cavity; ③clean the mold surface; ④stabilize the process.; After adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
Conclusión clave
Surface quality is managed by temperature and mold surface.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; Include this case in the defect archive as a reference for troubleshooting similar problems in the future
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!