Molds & Tooling
6 مشاهدة
TPE Product Surface Pits
ظاهرة المشكلة
Fine pits appear on the surface.
تحليل الأسباب
Mold surface condition or contamination; impurities in the material are also replicated to the surface.; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
الحل
①Clean and maintain the mold surface; ②check material cleanliness; ③polish the cavity; ④filter impurities.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Check both mold and material for pits; cleaning is the common countermeasure.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!