Molds & Tooling
8 visualizaciones
TPE Product Surface Pits
Fenómeno del problema
Fine pits appear on the surface.
Análisis de la causa
Mold surface condition or contamination; impurities in the material are also replicated to the surface.; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solución
①Clean and maintain the mold surface; ②check material cleanliness; ③polish the cavity; ④filter impurities.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusión clave
Check both mold and material for pits; cleaning is the common countermeasure.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!