Molding Process
2 مشاهدة
EVA foam open cell content is high
ظاهرة المشكلة
EVA foam open cells >30%, exceeding 10%
تحليل الأسباب
Foaming temperature too high with thin cell walls rupturing into open cells; insufficient crosslinking with low wall strength
الحل
1) Reduce temperature by 5-10°C to reduce wall rupture; 2) DCP 0.5-0.8wt% to increase wall strength; 3) Appropriately reduce AC to reduce gas pressure impact
الخلاصة الأساسية
High open cell content is caused by cell wall rupture; temperature control and moderate crosslinking are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!