Molding Process
4 visualizaciones
EVA foam open cell content is high
Fenómeno del problema
EVA foam open cells >30%, exceeding 10%
Análisis de la causa
Foaming temperature too high with thin cell walls rupturing into open cells; insufficient crosslinking with low wall strength
Solución
1) Reduce temperature by 5-10°C to reduce wall rupture; 2) DCP 0.5-0.8wt% to increase wall strength; 3) Appropriately reduce AC to reduce gas pressure impact
Conclusión clave
High open cell content is caused by cell wall rupture; temperature control and moderate crosslinking are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!