Extrusion & Post
12 مشاهدة
Material overflow at PU vacuum section
ظاهرة المشكلة
Material overflows at the vacuum section in PU extrusion, vent hole clogged
تحليل الأسباب
PU melt viscosity low, overflowing at vacuum section; vacuum section temperature too high, viscosity even lower, aggravating overflow; vent hole design improper
الحل
1) Lower vacuum section temperature by 5-10°C to increase viscosity; 2) Add baffle above the vent hole to prevent overflow; 3) Increase screw speed to accelerate conveying and reduce residence
الخلاصة الأساسية
Overflow is caused by low melt viscosity; temperature reduction and baffle are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!