Extrusion & Post
9 Aufrufe
Material overflow at PU vacuum section
Problembeschreibung
Material overflows at the vacuum section in PU extrusion, vent hole clogged
Ursachenanalyse
PU melt viscosity low, overflowing at vacuum section; vacuum section temperature too high, viscosity even lower, aggravating overflow; vent hole design improper
Lösung
1) Lower vacuum section temperature by 5-10°C to increase viscosity; 2) Add baffle above the vent hole to prevent overflow; 3) Increase screw speed to accelerate conveying and reduce residence
Wichtigste Erkenntnis
Overflow is caused by low melt viscosity; temperature reduction and baffle are key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!