Blow Molding
6 مشاهدة
MP extrusion '2079851475616104457 severe parison sag
ظاهرة المشكلة
MP extrusion '2079851475616104457 parison sag 20-40mm causes bottle bottom wall thickness of only 0.3-0.4mm
تحليل الأسباب
MP melt strength low, parison stretched thinner under gravity; parison extrusion speed slow, increasing sag time; parison temperature high, viscosity low, aggravating sag
الحل
1) add slight crosslinking agent 0.3-0.5wt% to increase melt strength; 2) increase parison extrusion speed to shorten sag time; 3) reduce parison temperature 10-15°C to increase viscosity; 4) wall thickness controller to compensate sag
الخلاصة الأساسية
parison sag is caused by low melt strength; slight crosslinking and wall thickness control are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!